x
Search Inventory    Search Products & Site

John Deere Automation 4.0 Activation For Gen 4 CommandCenter™

Double tap to zoom

 

Features

Unlock all Gen 4 Precision Ag applications with CommandCenter™ Automation

AutoTrac™ Turn Automation available with the automation activation AutoTrac™ Turn Automation available with the automation activation

Producers ready to take a step toward automation in their precision ag journey are ready for the CommandCenter Automation Activation. The bundle includes all of John Deere’s precision ag applications so that they can spend more time focusing on job quality and less time operating the machine itself.

The CommandCenter Automation activation gathers all available precision ag applications into a single orderable product for the 4600 CommandCenter Display with options to upgrade from other activation levels. This approach delivers more total customer value in a way that allows producers to use the applications they want throughout the crop production cycle without the worry and expense of licensing individual precision ag applications. 

With CommandCenter Automation Activation 4.0, operators have access to the following applications:

CommandCenter Automation Activation 4.0 is a non-transferrable display activation compatible with any John Deere machine equipped with a 4600 CommandCenter Display and v2 server. Functionality is dependent on machine configuration and may require additional hardware. Data created with a Gen 4 display is only compatible with John Deere Operations Center and can be transferred either wirelessly or via a USB drive with 4- to 32-GB capacity

Automatically create AutoTrac™ guidance lines based on first field pass with AutoPath™ system

Create guidance lines with AutoPath that can be used on subsequent passes Create guidance lines with AutoPath that can be used on subsequent passes

For large row-crop producers, setting up guidance lines in standing crops is a challenge. The process is slow, and there is no guarantee that the machine will run accurately between crop rows.

 

The AutoPath system automates data from the first documented pass to address these challenges. During the first pass, a map of all rows is created. AutoPath uses this data to automatically create accurate, full-field guidance lines for secondary passes such as planting, side dress, spraying, and harvest. Setup time and crop damage is reduced, and operators know which rows to start on, regardless of equipment width.

Make the perfect end row turn every time with AutoTrac™ Turn Automation

Easily complete end-of-pass turns Easily complete end-of-pass turns

Accurate end-of-pass turns are difficult to repeat throughout the workday. At each turn, the operator must accurately perform several tasks at the proper time. As the hours add up, it becomes more difficult to perform these tasks, which can include turning the tractor, changing speed, raising and lowering the implement, etc. As fatigue sets in, headland turns can become inconsistent.

AutoTrac Turn Automation gives you a complete solution for accurate and repeatable end-of-pass turns throughout the entire field. It automatically completes accurate turns and carries out end-of-pass functions at appropriate times during the turn. This reduces strain on the operator and reduces input costs.

AutoTrac Turn Automation offers many benefits to the operator:

  • Ability to focus on the job to make necessary adjustments and better agronomic decisions on the go
  • Ability to watch the tractor and implement more closely, allowing for proactive adjustments instead of reactive fixes
  • Ability to more closely watch for damaging obstacles such as rocks, washouts, or holes
  • Increased productivity through faster, more efficient, and smoother end turns

 

AutoTrac Turn Automation offers options to meet numerous operating requirements:

  • U-turn – this option is a simple U-turn for traditional end-of-row turns to the next pass.
  • Figure-eight turn – this turn is helpful when operating at an angle to the headland. It allows the tractor to make a large sweeping figure-eight turn which reduces turn angle and allows the field boundary to be followed with each turn.
  • Straight through – this option causes the machine to continue through an upcoming boundary and not turn. It is helpful for operating through passable internal boundaries and allows the machine to raise the implement, cross a passable boundary, and lower it on the other side.

 

These benefits result in more uptime for the equipment and an operator who is more alert at the end of the day.

Precisely place the row where it is supposed to be with AutoTrac™ Implement Guidance

Plant accurate rows Plant accurate rows

The goal of all producers is to have inputs, such as seed or fertilizer, placed into the ground in the most accurate way possible. With the increasing cost of inputs and adoption of farming practices that need precision, such as strip-till applications, accuracy at the implement has become increasingly important.

AutoTrac Implement Guidance helps maximize the use of inputs by increasing accuracy and repeatability at the implement thanks to a second receiver on the implement. Having a second StarFire™ receiver located on the implement allows the tractor to guide the implement through the field with additional accuracy, even on curved passes and sloping terrain. AutoTrac Implement Guidance (passive) commands the tractor to the correct location to keep the implement on the guidance line. In applications utilizing AutoTrac Implement Guidance, seeds are more consistently placed to take full advantage of pre-applied nutrients. This level of precision allows implement guidance to reduce overall input costs.

Reduce skips and overlaps with Gen 4 Section Control

John Deere Gen 4 Section Control switches boom sections on or off, reducing overlap and improving product placement.

Key features of John Deere Gen 4 Section Control include:

  • Automatic control of sprayer sections when passing across:
    • Previous coverage
    • Exterior and interior boundaries
    • Established headlands (buffer zones)
  • Improve efficiency by reducing overlap, skips, input costs, and operator stress
  • Easier setup with distance-based tuning

John Deere Gen 4 Section Control is available as part of the CommandCenter™ Premium application and requires a StarFire™ position receiver.

Reduce operator stress while following crop rows with AutoTrac™ RowSense™ system

AutoTrac RowSense system
A relaxed operator using AutoTrac RowSense software in an R4038 A relaxed operator using AutoTrac RowSense software in an R4038
Combine with RowSense sensor Combine with RowSense sensor
Hagie™ STS14 with RowSense sensor Hagie™ STS14 with RowSense sensor

Post-emergence operations such as spraying fungicide in July or harvesting corn in October can be stressful for operators. On top of steering the machine, an operator is required to monitor several other areas such as spray rates, ground terrain, grain or forage quality, or managing tender trucks and grain carts. Operating at night, in windy conditions, or while harvesting lodged corn can add even more stress for the operator.

Using feelers that engage the crop rows, AutoTrac RowSense has revolutionized the ability to use AutoTrac for post-emergence applications in later-season corn.

A study using advanced, eye-tracking glasses determined where an operator’s attention is focused while operating a sprayer through tall, standing corn. Without AutoTrac RowSense or Vision, the operator spent about 82.5 percent of the time looking forward. When AutoTrac RowSense or Vision was utilized, the same operators only spent 70 percent of the time looking forward and more time watching sprayer booms and monitoring machine performance on the vehicle display. AutoTrac RowSense focuses on steering so the operator can focus on other value-added tasks.

Hagie is a trademark of Hagie Manufacturing Company, LLC and similar to John Deere branded equipment, John Deere will also support Hagie equipment.

Use equipment and people even better with In-Field Data Sharing

Using Gen 4 In-Field Data Sharing, up to six tractors, sprayers, nutrient applicators, or combines can share as applied maps and guidance lines to reduce overlap, improve product placement, and monitor job quality in other machines. Equipment can work together at the same time or use maps created earlier by another machine to increase efficiency.

Three machines sharing coverage Three machines sharing coverage
Sharing as-applied maps Sharing as-applied maps

Using a streamlined setup process, In-Field Data Sharing matches maps and guidance lines together based on the information selected in the Work Setup screen, the same information is needed to document an operation. Setup items can be sent to the display from Operations Center for selection to make setup even easier.

Searching for other work groups Searching for other work groups
Joining a work group Joining a work group

The information needed depends on the operation:

  • Planting and seeding: Client, Farm, Field, and Crop
  • Product application: Client, Farm, Field, and Product or Tank Mix
  • Harvest: Client, Farm, Field, and Crop

Automate grain cart control while unloading on-the-go with Gen 4 Machine Sync

Filling the grain cart in the field Filling the grain cart in the field

Harvest is hectic. Producers are focusing on getting all the crop from the field to the bin within a tight harvest window. Using Machine Sync, those producers can focus more on grain harvest and grain quality and worry less about keeping the grain cart under the spout when unloading on the go. Gen 4 Machine Sync provides a solution to harvest stress by creating a wireless network between the tractor and combine to enable on-the-go unloading by synchronizing tractor speed and direction of travel with the combine.

Machine Sync works with In-Field Data Sharing to show the location of all combines and tractors within the fleet of Gen 4 machines harvesting in the field. Knowing the exact location of multiple combines as well as their grain tank fill level and unloading auger status allows the grain cart operators to be in the right place at the right time. 

Activate Gen 4 display software remotely

Over-the-air activations were enabled with the 18-1 software update to the Gen 4 displays. With that software update or newer, a John Deere dealer can send activations to a Gen 4 display without leaving the office. Over-the-air activations also eliminate the need to manually enter long activation codes like was done previously. This also eliminates multiple trips between the cab and the farm office to enter codes and verify completion.

NOTE: Over-the-air activations requires a current JDLink™ Connect subscription and Mobile Telematics Gateway (MTG). Planter and platform activations and subscriptions cannot be updated over-the-air.

Specifications

Sorry, currently there are no specs but check back with us later.