John Deere 44-in. Front Blade for X300 Select Series Lawn Tractors

44-in. (112-cm) Front Blade (shown with optional angling and electric lift)

The front blade is excellent for pushing light snow or loose material. It is 44 in. (112 cm) wide and can be angled 25 degrees right or left or used straight forward.

This 44-in. (112-cm) Front Blade is designed for use on model year 2016 and newer X300 Select Series™ Tractors.

44-in. (112-cm) Front Blade used for snow removal (shown with optional angling and electric lift)

The 44-in. (112-cm) Front Blade can be operated from 1 in. (2.5 cm) below ground level to 5 in. (13 cm) above ground level.

A 3-in. (8-cm) floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.

The lift-linkage design makes raising the blade easy.

44-in. (112-cm) Front Blade removing snow (shown with optional angling and electric lift)

The blade can be installed or removed in minutes. No tools are needed to remove the blade, and no heavy lifting is required.

Adjustable skid shoe

Adjustable skid shoes on each side of the blade allow the operator to select the correct blading height for various conditions and jobs.

Skid shoes can be adjusted to any of seven different heights, supporting the blade at the selected level as it moves along the ground surface.

Heavy-duty blade construction (shown with optional angling and electric lift)

Constructed of heavy, 0.12-in. (3-mm) thick steel, the front blade has a reinforcing angle behind the front edge and a replaceable cutting edge.

The cutting edge takes most of the wear to greatly extend the useful life of the blade.