Brillion SSP-136

Double tap to zoom

Cast Single Lip Cat. IV Hitch
Hydraulic Leveling Hitch
Transport Width Under 13' 6"
Center Section is Carried by 12.5L x 15 (GY-Fl) Load F Tires with 8 Bolt Hubs and 2 7/8" Slip-In Spindles
Wings Equipped with 11L x 15, 12 Ply Tires with 6 Bolt Hubs and 2" Spindles
Wings Float Up 14 Degrees and Down 14 Degrees for Superior Contour Following and Precision Seed Placement
Coil Tine Track Remover Kit Standard for Center Section
Wheel Track Removers Standard for Wing Tires
Each Seeder is Mounted to the Main Frame Via a Three-Point Hitch Allowing Each Seeder to Raise and Lower in the Field without Changing Position of the Main Frame
Electric Shut Off Clutches Control Each Seeder Individually
Electronic Acre Meter Kit Standard Equipment
Seed Shaft Monitor Kit Standard Equipment
Folding Row Marker Kit Available
LED Safety Warning Lights
Powder Coat Paint

Model	SSP-136
Description	(3) SSP-112 Agricultural Seeders
Approximate Weight (Empty)	18,100 lbs. (8,210 kg)
Working Width	36 ft. (10.97 m)
Transport Width	13 ft. 6 in. (4.1 m)
Transport Height	11 ft. (3.4 m)
Overall Length	31 ft. (9.4 m)
Hitch	Cast Single Lip Cat. IV
Wheels - Center Section	8 Bolt Hubs with 2 7/8 in. (73.1 mm) Slip In Spindles
Wheels - Wings	6 Bolt Hubs with 2 in. (50.8 mm) Spindles
Tires - Center Section	(4) 12.5L x 15, (GY-Fl) Load F
Tires - Wings	(4) 11 L x 15, 12 Ply
Hydraulic Circuits Required	3 (+1 for Row Marker Kit)
Seed Box	All Steel Construction
Seed Box Capacity	27 Bushels (951.5 l)
Seed Metering	Standard Micro-Meter
Seed Metering Drive	Independent Electric Seeder Clutches
Pulverizer Rollers	Gray Cast Iron with Notched Profile
Front Roller (Fixed)	14.5 in. (368.3 mm) Diameter
Rear Roller (Independently Floating)	10.25 in. (260.4 mm) Diameter
Blade Agitator for Rear Seed Box	N/A
Cage Agitator for Rear Seed Box	N/A
Brush Agitator for Rear Seed Box	N/A
Front Seed Box Divider Kit	N/A
Rear Roller Assembly with Turfmaker Sprockets	Optional
Folding Row Marker Kit	Optional
Wheel Track Removers - Wings	Standard
Coil Tine Track Remover Kit - Center Section	Standard
Front Roller Scraper Kit for One Seeder	Optional
Electronic Acre Meter Kit	Standard
Seed Shaft Monitor Kit	Standard
LED Safety Warning Lights & SMV Emblem	Standard
Safety Chain Kit	Standard
Powder Coat Paint, Red	Standard
Horsepower Requirements	Minimum of 200 HP (149.1 kW)
Recommended Operating Speed	4.5 to 6.0 MPH (7.2 to 9.7 km/h) Dependent on Conditions